EHC-09 Monochrome Series

Our EHC-09 series is our most popular series. The EHC-09 is available in 6 models, ranging from our simplest EHC-09A to our loaded EHC-09DLW.

EHC-09A
The EHC-09A is our entry-level model, which is field-upgradeable, in our EHC-09 series. It can be used with three transducers. The standard and default transducer is our DKS-537, which measures from .040-20″ in steel. The DC-250 is the preferred probe for weaker materials such as castings and the DK-718 for thinner (.030″ in steel) or smaller diameter applications such as boiler tubes. Our EHC-09 series gauges come standard with a carrying case, a 2oz bottle of couplant, a CD manual, and a DKS-537 transducer.

EHC-09B
The EHC-09B model includes all the features of the EHC-09A as well as the entire fleet of probes offered for the EHC-09 family. The EHC-09B also includes an alarm that beeps in alarm conditions.

EHC-09
The EHC-09 includes all the features of the EHC-09B model. The EHC-09 also includes echo to echo to ignore coatings, vibrate on alarm, and achieve a fast minimum. The vibration alarm informs the user when a thickness is above or below a preset threshold by vibrating the gauge, making it ideal for noisy work environments. Fast Minimum can perform 20 measurements per second as well as maintain the minimum value while displaying the current reading, the gain in low, standard, and high setting in 3dB settings, the velocity mode to use the gauge as a velocimeter, as well as the hold and differential mode.

EHC-09DL
The EHC-09DL model includes all the features of the EHC-09 as well as a 100,000-reading data logger with the ability to export readings to excel. It also includes the ability to display B-scans. The EHC-09DL kit comes with a USB cable and protective case.

EHC-09W
The EHC-09W combines a live waveform with all the features of the EHC-09 gauge (no data logger). In addition, it can adjust range, gain, blanking, and rectification.

EHC-09DLW
This is our top-of-the-line model with all the features of the EHC-09DL and the EHC-09DLW. It includes Echo to Echo, Bscan, a 100,000-reading datalogger (36,000 waveforms), and a live waveform.

The following accessories are available for the EHC-09 series:

Spring Loaded Holder
The spring-loaded holder (SPH-718) is the ideal holder for small diameter applications, such as pipes, to prevent probe wobble. Shown below is the SPH-718 with the DK718 transducer inside. The probe can also be rotated and the fixture has V-notches to facilitate probe alignment.

5-Step Test Block
We offer a 5-step carbon steel test block with nickel-plated finish, engraved in both English and metric, with values of .100′, .200″, .300″, .400″, .500″ or 2.54mm, 5.05mm, 7.5mm, 10.0mm, 12.7mm (These blocks do not have certification, but can be supplied on special order at an additional cost).

Protective Case
We offer a custom protective case with part number PP-09 for the EHC-09 series.

EHC-09 Transport Case
The EHC-09 transport case is shown with common inclusions. (Replacement batteries and 5-step test block are sold separately).

Cables
Dual and single cables available in 6 feet or other lengths upon request. Shown from left to right: DLM-06, DLM-06ACMP, LM-06

DLSL-09
This Dual Lemo to Microdot adapter is required when using a delay line or pencil probe with our EHC-09 series.

Couplings
We offer a variety of ultrasonic couplings, from a standard gel in 2 oz. or 12 oz. options, to high temperatures up to 1100 degrees F. Contact us for more details.

Foot Switch
With this hardware option, the operator can save, freeze, or send readings with a foot switch.

AC Power
With this hardware upgrade, the EHC-09 can be operated with AC power (please note that this is not a charging system). In other words, with this option, the EHC-09 can be operated with either AC or battery power.