CTS 9005

Digital ultrasonic flaw detector

  • Max. sampling rate 240MHz; measurement resolution 0.1mm.
  • Operating frequency range: 0.5~10MHz.
  • 20~2000Hz (step: 20Hz): Avoidance of reverberation signals during flaw detection.
  • The AGC (automatic gain control) function ensures efficient flaw detection.
  • The AVG/DGS curve works with the echo comparison function, making it easier to quantify
    echoes with different distances and amplitudes.
  • The 5.7″ color TFT LCD with wide viewing angle, high brightness, and high resolution delivers every clear detail.
  • The peak value memory function facilitates the rapid scanning and measurement of workpieces.
  • Three different color schemes can meet the requirements of different application environments and habits.
  • Up to 300 sets of curves and waveforms can be stored for different workpieces and flaw detection standards.
  • Compact and portable: The total weight of the device (including battery) is approximately 1.2 kg, suitable for working in the air and in the field.
  • Easy to operate: There are only a few, clearly defined buttons that can be operated with just one hand.
  • Environmental protection: This system was developed according to IP65 standard and is suitable for complex industrial flaw detection environments.
  • Very low consumption: The configured Li-polymer battery can support up to 7 hours of continuous operation.
  • Strong performance: High resolution and penetration, precise flaw detection from thin plates to large forgings.