SMD®601 Plus

The most sensitive multi-zone metal detector for law enforcement and correctional facilities

The SMD®601 Plus is an extremely sensitive walk-through metal detector. A full-height LED bar indicates the position of detected metal masses during passage. This enables rapid identification of threats and reduces or eliminates the need for manual searches. The SMD®601 Plus detects even the smallest metal objects at any location on or in the body.

Highly sensitive WTMD that fully complies with NIJ-0601.02 and NIJ-0601.03 standards
Fast and precise analysis of all body parts of persons in transit, from shoes to the top edge
Accurate localization of individual and multiple metal objects
Excellent immunity to external interference
New mechanical construction with high degree of protection
Integrated correction profiling system (optional)
Unmatched reliability

Fully compliant with NIJ-0601.02 and NIJ-0601.03 standards

The SMD®601 Plus extends the detection sensitivity of the previous SMD®601 model to metallic threats that were previously considered undetectable due to their minimal dimensions and metal composition—similar to those specified in the new NIJ-0601.03 standard.

Reliable detection of all metallic dangerous objects

Very accurate pinpointing of individual and multiple metal targets
Quick, accurate analysis of all parts of the body of people in transit, from the shoe level to the crossbar
Built-in programs to screen visitors and staff for weapons and contraband

New IP66-certified housing for the control unit

Total compatibility with previous control units
Robust structure through the use of high-performance polymers for the construction of housing
Waterproof / Dustproof: IP66 compliant (IEC 60529)
Exceptional impact resistance at low and high temperatures and resistance to corrosion from atmospheric agents
Display made with specific polymer to improve the visibility of the LEDs by increasing the definition and clarity

Unique Alarm Signaling

20 vertical localization zones
Good visibility of the control unit and zone display, regardless of operator position and installation environment
Flexible acoustic alarm system: 10 continuous and pulse tones; 34 special tones
10 alarm volume levels
High-precision passage counter: Incoming passages; Outgoing passages; Alarm frequency

The most powerful and versatile security features

Over 40 built-in Security Programs: Up to 22 pre-programmed Security Programs; Up to 20 user programmable Security Programs
Chip Card system for fast, simple and secure parameter changes (i.e. alarm volume and tone, counter reading, etc.) and security level selection.
Any security standard can be enhanced with selectable random alarm probability

Chip card system

The system enables security management to set the security level quickly, reliably, and without any programming of the device.

Technical specifications

Gate structure

Modern, robust, and washable panels
Vandal-proof and tamper-proof IP66-rated control unit
Integrated high-precision passage counters (2-beam light barriers)
Tamper-proof on/off switch
Protected against aging, weather influences, and wear

Operational features

High discrimination capability and throughput rates five times or more higher than other metal detection systems
Fast reset time of only 0.2 seconds for high throughput rates
Very high detection speed (up to 15 m/s)
Integrated function check
Reading of entry and exit data as well as security levels at the touch of a button

Quality

Continuous self-diagnostic system
Proven reliability
No regular recalibration and preventive maintenance required
No scheduled maintenance
Fully digital design

Alarm signals

Multi-zone display bar for localization of “height above body”
20 vertical localization zones
2 display bars, programmable as zone displays and/or step lights
Specific colored alarm display for shoes
Green and red measurement signals proportional to the mass of the detected target
10 selectable continuous tones and pulse tones as well as 34 special tones
10 selectable volume levels from 0 to 90 dB(A) at 1 m distance
Random alarm function with independent counters, alarm tone, and alarm volume
Met-Identity technology (separate alarm signaling for ferrous and non-ferrous metals)

Type of signaling

Fixed or proportional to the transported mass—visible from 6 m at an illuminance of 4000 lux
60 separate zones (20 vertical × 3 horizontal) on the entry and exit sides

Programming

Over 40 integrated security programs
Remote control via infrared remote control, Bluetooth, or Ethernet interface 10/100 Base-T (optional)
Security level: Command according to international standard (IS) / chip card
Local control via alphanumeric display and keyboard of the control unit
Programming and access to chip cards protected by user and superuser passwords

Environmental data

Power supply via safe low-voltage DC power supply
Power supply: 100…277 V~ ±10%, 47…63 Hz, typical power consumption 50 VA
Operating temperature: -20°C to +65°C (-37°C to +70°C on request)
Storage temperature: -37°C to +70°C
Relative humidity: 0 to 95% (non-condensing)

Installation data

Automatic synchronization between two or more metal detectors with a distance of up to 5 cm without using external cables
Automatic installation function (OTS)

Certification and Compliance

Full compliance with the requirements of NIJ-0601.02 standard
Complies with applicable standards for law enforcement and correctional facilities
Complies with applicable international standards for electrical safety and EMC
Complies with applicable electromagnetic standards for human exposure and
pacemaker safety
Safe for magnetic media (CDs, tapes, etc.)

Comprehensive support

CEIA offers comprehensive support in operational and technical training through certified personnel, either at CEIA’s premises or at the customer’s site